Robot riveting
Release time:
2019-05-22 14:08
The robot is an advanced riveting equipment developed on the basis of industrial robots. It consists of a robot body, a robot controller and corresponding riveting devices. Its main advantage is that its stability can improve welding quality and productivity, improve workers' working conditions and so on. The use of riveting robots can eliminate the influence of human factors on product quality and ensure the quality of products. The bumper is composed of sheet metal stamping parts, a bumper skeleton assembly of a car. The thickness of such structural materials is thin, mostly 1.5-3mm. Artificial welding is prone to pores, slag inclusions, undercuts, welds, craters, Defects such as cracks, unfusion, and weld penetration. In addition, the length of the weld is much shorter than 5-40mm, and there are many rivet points, many movements, easy to leak and riveting, and high labor intensity. This structure is suitable for automated production, the establishment of riveting equipment robot workstations, riveting with robots.

The application and development of self-pierce riveting technology, riveting technology is actually a special connection technology, the parts are connected by rivet or rivet-free connection technology, the riveting process is now very advanced, self-piercing riveting is a kind of Or cold joining technology of two or more metal sheets. After the special rivet penetrates the top sheet, the hollow structure of the rivet tail expands and penetrates under the action of the rivet mold without piercing the bottom sheet, thereby forming a firm riveting point.
With the rapid development of the automobile industry technology and the increasingly fierce competition, the automobile body structure is gradually developing toward reducing the weight of the vehicle and reducing the cost. A large amount of lightweight material must be used in the body structure, which brings many new problems to the connection of lightweight materials and the connection between lightweight materials and conventional steel. When considering the problem of the connection of the dissimilar materials between the lightweight material and the traditional steel, the different melting points of the dissimilar materials make the traditional body connection technologies such as resistance spot welding and arc welding have certain limitations on the connection of dissimilar materials. Sex.
A new connection method is needed to replace the spot welding technology used in conventional automotive bodywork. South America's HENROB company cooperates with countries to study the SelfPiercingRiveting (SPR) technology to successfully achieve the connection of dissimilar materials. Compared with resistance spot welding, the self-pierce riveting process is quiet, fast, and non-polluting, and can be automated, and there is no heat conduction during the connection process. This technology makes up for the shortcomings of traditional body welding technology in the connection of dissimilar materials, and thus has become more and more widely used in body manufacturing.
Since 1993, Audi has used self-piercing riveting technology on the Audi A8 all-aluminum car, which has enabled the technology to be gradually developed in the automotive industry. However, the research on self-pierce riveting technology in China is in its infancy. At present, most of the researches on the connection process of self-pierce riveting are carried out. The research on the failure mode and the shear strength prediction method of self-pierce riveted joints are relatively few. In this work, the combination of numerical simulation and experimental verification was used to study the shearing process of self-piercing riveted joints of steel-steel materials and steel-aluminum dissimilar materials, and the failure modes of the two joints were analyzed. A prediction method for the shear strength of self-piercing riveted joints is proposed. It is expected to provide a basis for the design of self-piercing riveted joints for automotive body connecting materials.
Self-piercing riveting has the following advantages: it can be connected with many different materials: steel plate; aluminum plate; plastic plate; can be riveted multi-layer plate group; no thermal effect - can be used for coating or plating plate connection without damaging the coating layer, also No other damage; low energy consumption; short cycle of riveting process; environmentally friendly process, no heat, smoke, steam, sparks, dust or debris when riveting; riveting quality is stable and reproducible; quality of riveting point can pass Visual inspection; can be combined with the gluing process. From the simplest scissors to the complex Shenzhou spacecraft, riveting technology has its place.
Next Page